LANKHORST RollStop system RS100

Sort by

LANKHORST RollStop system RS100

Diameter coils: 700-2500 mm
Coil width: 650-1950 mm (using spacers)
Max load: 100 tons
Temperatures up to 60 °C
For stacking up to 3 levels


A complete RollStop RS100 system consists of the components:
RollStop-block RS100
Rail RS100
Steel connector RS100
Rail/Tunnel spacer RS100
Rail/Tunnel end spacer RS100


For assistance in calculating a RollStop RS100 system specifically adapted to your warehouse, please contact our sales team


LANKHORST RollStop system RS100 HR

Heat resistant version, for temperatures up to 110°C


Diameter coils: 700-2500 mm
Coil width: 650-1950 mm (using spacers)
Max load: 100 tons
Temperatures up to 110 °C
For stacking up to 3 levels


A complete RollStop RS100 system consists of the components:
RollStop-block RS100 HR
Rail RS100
Steel connector RS100
Rail/Tunnel spacer RS100
Rail/Tunnel end spacer RS100


For assistance in calculating a RollStop RS100 HR system specifically adapted to your warehouse, please contact our sales team


LANKHORST RollStop system RS100 Outdoor (WR)

Weather resistant version for outdoor use


Diameter coils: 700-2500 mm
Coil width: 650-1950 mm (using spacers)
Max load: 100 tons
Temperatures up to 60 °C
For stacking up to 3 levels


A complete RollStop RS100 WR system consists of the components:
RollStop-block RS100
Rail RS100 WR
Steel connector RS100 WR
Rail/Tunnel spacer RS100
Rail/Tunnel end spacer RS100


For assistance in calculating a RollStop RS100 WR system specifically adapted to your warehouse, please contact our sales team


Lankhorst RollStop RS100

252262
Diameter coils: 700-2500 mm
Coil width: 650-1950 mm (using spacers)
Max load (using 4 RollStops): 100 tons
Temperatures up to 60 °C
For stacking up to 3 levels
To be used together with Rail RS100 or Rail RS100 WR

Lankhorst RollStop RS100 HR

252386
Heat resistant version, for temperatures up to 110°C
Diameter coils: 700-2500 mm
Coil width: 650-1950 mm (using spacers)
Max load (using 4 RollStops): 100 tons
Temperatures up to 60 °C
For stacking up to 3 levels
To be used together with Rail RS100 or Rail RS100 WR

Lankhorst Rail RS100

252261
To be used togehter with the RollStop RS100 or CoilWedge 120/45 or 150/45
1 pc rail =4 meters
Always used in pairs of two
Also available in weather resistant version (Lankhorst Rail RS100 Outdoor (WR))
To create lengths over 4 meters, the Steel Connector RS100 must be used

Lankhorst Rail RS100 Outdoor (WR)

252488
Weather resistant version for outdoor use
To be used togehter with the RollStop RS100 or CoilWedge 120/45 or 150/45
1 pc rail =4 meters
Always used in pairs of two
To create lengths over 4 meters, the Steel Connector RS100 Outdoor (WR) must be used

Lankhorst Steel Connector RS100

252350
Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation tool RS100 is needed

Lankhorst Steel Connector RS100 Outdoor (WR)

252487
Weather resistant version for outdoor use
Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation tool RS100 is needed

Lankhorst Rail Spacer RS100

252567
Used together (in pair) with Tunnel spacer RS100 to fixate the parallell rail pieces at a correct distance from each other, depending on coil width
One pc per 4 meters is needed for lenghts over 4 meters
For RailRS100 and Rail RS100 Outdoor (WR)

Lankhorst Tunnel Spacer RS100

252568
Used together (in pair) with Rail spacer RS100 to fixate the parallell rail pieces at a correct distance from each other, depending on coil width
One pc per 4 meters is needed for lenghts over 4 meters
For Rail RS100 and Rail RS100 Outdoor (WR)

Lankhorst Rail End Spacer RS100

252579
Used together (in pair) with Tunnel End spacer RS100 at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS100 and Rail RS100 Outdoor (WR)

Lankhorst Tunnel End Spacer RS100

252580
Used together (in pair) with Rail End spacer RS100 at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS100 and Rail RS100 Outdoor (WR)

Lankhorst End Cap RS100

252351
For applications where spacers are not used, the rail needs to be fixated to the floor and protected using End caps
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS100 and Rail RS100 Outdoor (WR)

Lankhorst OilStop RS100

252489
For oily coils the OilStop can be used to collect the dripping oil and prevent the oil from staining the floor
For use on the RS100 systems

Lankhorst Installation Tool RS100

252353
The installation Tool RS100 is used to tighten the Steel Connector RS100 when connecting rail lengths over 4 meters
The Installation Tool RS100 ensures that you get the correct space between connected rails RS100, to ensure the blocks (RollStop RS100, CoilWedge 120/45 or CoilWedge 150/45) can also be placed over the joints
One to two Installations tools are needed for a complete system, depending on the size of the system and the number of people installing the system