LANKHORST RollCradle system RC80

Diameter coils: 901-2100 mm
Coil width: 900-1600 mm (using spacers)
Max load: 80 tons
Temperatures up to 60 °C
For stacking up to 2 levels

A complete RollCradle RC80 system consists of the components:
Rollcradle RC80
Rail RS40
Steel connector RS40
Rail/Tunnel spacer RS40
Rail/Tunnel end spacer RS40

For assistance in calculating a RollCradle RC80 system specifically adapted to your warehouse, please contact our sales team

Diameter coils: 901-2100 mm
Coil width: 900-1600 mm (using spacers)
Max load: 80 tons
Temperatures up to 60 °C
For stacking up to 2 levels

A complete RollCradle RC80 WR system consists of the components:
Rollcradle RC80
Rail RS40 WR
Steel connector RS40 WR
Rail/Tunnel spacer RS40
Rail/Tunnel end spacer RS40

For assistance in calculating a RollCradle RC80 WR system specifically adapted to your warehouse, please contact our sales team

Diameter coils: 901-2100 mm
Coil width: 900-1600 mm (using spacers)
Max load: 80 tons
Temperatures up to 60 °C
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 WR

To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
Also available in Weather resistant version (Lankhorst Rail RS40 Outdoor (WR)
To create lengths over 4 meters, the Steel Connector RS40 must be used

Weather resistant version for outdoor use
To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
To create lengths over 4 meters, the Steel Connector RS40 Outdoor (WR) must be used

Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation Tool RS40 is needed

Weather resistant version for outdoor use
Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation Tool RS40 is needed

Used together (in pair) with Tunnel spacer RS40 to fixate the parallell rail pieces at a correct distance from each other, depending on coil width
One pc per 4 meters is needed for lenghts over 4 meters
For Rail RS40 and Rail RS40 Outdoor (WR)

Used together (in pair) with Rail spacer RS40 to fixate the parallell rail pieces at a correct distance from each other, depending on coil widthOne pc per 4 meters is needed for lenghts over 4 metersFor Rail RS40 and Rail RS40 Outdoor (WR)

Used together (in pair) with Tunnel End spacer RS40 at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

Used together (in pair) with Rail End spacer RS40at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

For applications where spacers are not used, the rail needs to be fixated t the floor and protected using End caps
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

For oily coils the OilStop can be used to collect the dripping oil and prevent the oil from staining the floor
For use on the RS40 systems

The installation Tool RS40 is used to tighten the Steel Connector RS40 when connecting rail lengths over 4 meters
The Installation Tool RS40 ensures that you get the correct space between connected rails RS40, to ensure the blocks (RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle) can also be placed over the joints
One to two Installations tools are needed for a complete system, depending on the size of the system and the number of people installing the system