LANKHORST CoilWedge system RS40

Weather resistant version for outdoor use

Diameter coils: 546-2500 mm
Coil width: 1200 mm or 1500 mm (depending on choice of CoilWedge-chocks) Wider coils if the coil is aligned in the centre of the CoilWedges
Max load: 40 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels

A complete CoilWedge RS40 WR system consists of the components:
CoilWedge-chock 120/35 or 150/34 (depending on coil width)
Rail RS40 WR
Steel connector RS40 WR
EndCap RS40

For assistance in calculating a CoilWedge RS40 WR system specifically adapted to your warehouse, please contact our sales team

Diameter coils: 546-2500 mm
Coil width: 1200 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 40 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 HR

Diameter coils: 546-2500 mm
Coil width: 1500 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 40 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 WR

To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
Also available in Weather resistant version (Lankhorst Rail RS40 Outdoor (WR)
To create lengths over 4 meters, the Steel Connector RS40 must be used

Weather resistant version for outdoor use
To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
To create lengths over 4 meters, the Steel Connector RS40 Outdoor (WR) must be used

Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation Tool RS40 is needed

Weather resistant version for outdoor use
Links the rail sections to create sections longer then 4 meters
To tighten the Steel Connector an Installation Tool RS40 is needed

For applications where spacers are not used, the rail needs to be fixated t the floor and protected using End caps
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

For oily coils the OilStop can be used to collect the dripping oil and prevent the oil from staining the floor
For use on the RS40 systems

The installation Tool RS40 is used to tighten the Steel Connector RS40 when connecting rail lengths over 4 meters
The Installation Tool RS40 ensures that you get the correct space between connected rails RS40, to ensure the blocks (RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle) can also be placed over the joints
One to two Installations tools are needed for a complete system, depending on the size of the system and the number of people installing the system